Quick Reference Guide (QRG) #5-2
WiringCorrect wiring of a 2nd generation tubular motor
Last updated12 September 2023
Wiring of Ignition Lock Motor 4270P (3-wires, 2nd Generation):
To program the limits, you will need a separate programmer with 2 wires (A) that plug into the motor head; once done, the program wires can to be disconnected. For programming instructions, refer to QRG #7-2 “Programming Limits of 2nd Generation Ignition Lock Motor 4270P”.
Wiring Diagram for Single Shade:
Wiring Diagram for Dual (2) Shades:
